Call us anytime


Opeening Time

Mon-Sat: 9.00-18.00

hot rolled NM500 wear resistant steel sheet Price in Iraq 2021


The secondary quenching and low temperature tempering of wear resistant composite plate are mainly used for high alloy steel workpieces without mechanical processing after carburizing. Carburizing, high-temperature tempering, one-time heating quenching, low-temperature tempering, quenching temperature 840-860℃, mainly used for Cr Ni alloy carburizing workpiece. The second quenching and low-temperature tempering of wear-resistant composite plate, hot rolled NM500 wear resistant steel sheet mainly improves the microstructure of the infiltrated layer. When the requirements for core properties are not high, quenching can be performed between AC1 and AC3, and when the requirements for core properties are high, it should be quenched above AC3.

The effect of nitrogen (N) on the properties of hot rolled NM500 wear resistant steel sheet and so on steel is similar to that of carbon and phosphorus. With the increase of nitrogen content, the strength of steel can be significantly improved, especially the plasticity, especially toughness, and the weldability will be decreased, and the cold brittleness will be intensified. At the same time, aging tendency, cold brittleness and hot brittleness will be increased, which will damage the weldability and cold bending property of steel. Therefore, the nitrogen content in hot rolled NM500 wear resistant steel sheet and so on steel should be reduced and limited as much as possible. Generally, nitrogen content should not be higher than 0.018%.

The company always insists on quality first. "Tolerance and trust, change and innovation, abide by rules, and focus on refining people" are the eternal credo of the team. Encouraged by the same creed and belief, BEBON people continue to grow and mature, and the team size is increasing expand. In the future, look beyond Chinese private steel companies to see BEBON. Looking to the future, we are not blindly pursuing bigger scale, but we are pursuing strength and brand strength.

The strip steel thickness is generally below 6mm, which is convenient for crimping and processing. You should choose the hot rolled NM500 wear resistant steel sheet, strip steel specifications according to your own purposes. The specifications and materials used for different purposes are different, so you must confirm it before buying. It is best to ask professionals to give advice before purchasing strip steel, and purchase the specifications and types you need according to the corresponding requirements.

Previous:The Ultrasonic flaw detection principle Next:NM500 hot rolled steel plate steel norma

Leave Comments